Technical guide
303, 304 or 316L Precision Ground Bar: How to Choose
Choose precision ground stainless bar by environment, machining needs and drawing requirements. Compare 303, 304 and 316L without relying on appearance.
Read articlePractical notes on selecting, specifying and inspecting piston rods, long shafts and guide components.
Technical guide
Choose precision ground stainless bar by environment, machining needs and drawing requirements. Compare 303, 304 and 316L without relying on appearance.
Read articleTechnical guide
Compare honed and roller-burnished cylinder tubes, then prepare bore, finish, wall thickness and inspection requirements for a clear quotation.
Read articleTechnical guide
Compare hollow and solid shafts using a simple geometry example, then check bore, wall, end machining and inspection details before ordering.
Read articleTechnical guide
Understand pitch, lead and starts on trapezoidal lead screws, with a travel example and a checklist for matching the screw, nut and drawing.
Read articleTechnical guide
Plan incoming inspection for chrome piston rods: traceability, diameter, straightness, surface condition, coating records and nonconformance handling.
Read articleTechnical guide
Oil at the rod can be associated with poor seal contact, a bent rod, damaged plating, scoring or a seal groove outside its required dimensions. A finding at the rod does not by itself identify the cause.
Read articleTechnical guide
Quenching and tempering is one way to obtain a specified balance of strength and toughness in suitable steels. Whether a piston rod needs this treatment depends on the material, loading and drawing requirements.
Read articleTechnical guide
Surface damage, geometric error and alignment can affect how a piston rod moves through its seals. Check the rod's condition and the assembly fit before assuming a seal alone is at fault.
Read articleTechnical guide
For paired guide components, the running fit depends on the relationship between the bore and outside cylindrical surface. Mark the controlling datum and specify diameter tolerance, roughness and any required coaxiality.
Read articleFAQ
The rod surface passes repeatedly through the seal and wiper in a cylinder. Hard chrome can provide a smooth, wear-resistant surface and improve corrosion resistance.
Read articleFAQ
Identify the journals that support bearings separately from the surfaces that seat gears or other transmission components. The drawing should call out diameter tolerances and surface roughness for each functional surface.
Read articleTechnical guide
The original technical guide discusses 45# steel, 40Cr and 2Cr13. These materials respond differently to quenching, tempering and surface hardening.
Read articleTechnical guide
The catalog discusses surface rolling and hard chrome plating as ways to change the condition of the rod surface. Hard chrome can provide a hard, smooth finish for wear and corrosion resistance.
Read articleFAQ
A piston rod connects the piston to the external load in a hydraulic or pneumatic cylinder. As the piston moves, the rod transfers that motion and force to the equipment.
Read articleProject enquiries
Send the critical dimensions, finish and quantity. We’ll help you check the right product family.