Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

What to Specify on a Long Shaft Drawing

Identify the journals that support bearings separately from the surfaces that seat gears or other transmission components. The drawing should call out diameter tolerances and surface roughness for each functional surface.

Identify the datum features and mark any required cylindricity, runout or alignment between surfaces. Add fit requirements and any restrictions on how the part will be held or inspected.

Separate the Fit Surfaces From the Overall Envelope

Show each bearing journal and shoulder relative to a common reference end. List the overall length and largest diameter separately from the closer fits required at each mounting location.

Indicate whether straightness applies along the full shaft or to a defined section. If runout is critical, identify the datum used for that measurement. Share the drawing with the supplier when diameter and length both approach the catalog limits.

Project enquiries

Working from a drawing?

Send the critical dimensions, finish and quantity. We’ll help you check the right product family.

Request a Quote