Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Applications and Selection
440C is a hardenable martensitic stainless grade. A bar intended for further turning, drilling or heat treatment will generally be specified differently from an already finished pin or shaft.
Tie the required hardness to a delivery or final treatment condition. Provide the ground diameter, tolerance and surface finish for any working areas in contact with other parts.
Specifications
Material identification
| Item | Technical Parameters |
|---|---|
| Material Grade | 440C |
| Chinese National Standard Grade | 95Cr18 |
| UNS Grade | S44004 |
| DIN Grade | 1.4125 |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr |
|---|---|---|---|---|---|
| 0.95–1.20 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 16.00–18.00 |
Mechanical properties
| Item | Mechanical Properties |
|---|---|
| Elongation after Fracture A | ≥5% |
| Brinell Hardness | 255–350 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm – Ø300 mm |
| Diameter Tolerance | Standard: h8, h9; High Precision: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Ø40 mm and below: 3 meters; Above Ø40 mm: 6 meters available (custom fixed lengths supported) |
| End Face Requirements | Flat ends, chamfered and deburred |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
| Process 4 | Hot-rolled base material → Peeling and straightening → Surface quenching → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
