Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

430 Stainless Steel Precision Ground Bar

Precision ground bar in 430 stainless steel.

AI-generated illustration of 430 Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Applications and Selection

430 is a ferritic grade. If the project specifies it, verify the grade on the purchase request and review the actual exposure conditions and finish needed for the component.

When an outside diameter will serve as a guide surface, mark the fit and roughness separately from dimensions that will be machined after delivery.

Specifications

Material identification

ItemTechnical Parameters
Material Grade430
Chinese National Standard Grade10Cr17
UNS GradeS43000
DIN Grade1.4016

Chemical composition (wt%)

CSiMnPSCr
≤0.12≤1.00≤1.00≤0.040≤0.03016.00–18.00

Mechanical properties

ItemMechanical Properties
Tensile Strength Rm≥450 MPa
Yield Strength Rp0.2≥205 MPa
Elongation after Fracture A≥22%
Brinell Hardness≤183 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm – Ø300 mm
Diameter ToleranceStandard grade: h8, h9; High-precision grade: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthØ40 mm and below: 3 meters; Over Ø40 mm: 6 meters available (custom fixed lengths acceptable)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot-rolled base material → Peeling & straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot-rolled base material → Peeling & straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote