Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

316L Stainless Steel Precision Ground Bar

Precision ground bar in 316L stainless steel.

AI-generated illustration of 316L Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Compare grade-specific selection questions in our 303, 304 and 316L precision ground bar guide.

Applications and Selection

316L is a low-carbon stainless grade. Use the grade designation from the drawing if material traceability matters, especially when the shaft is part of an assembly with defined cleaning or material requirements.

Indicate which surfaces remain ground and which will be cut or welded. Include the stock diameter, straightness and any final surface condition required after fabrication.

Specifications

Material identification

ItemTechnical Parameter
Material Grade316L
Chinese National Standard Grade022Cr17Ni12Mo2
UNS GradeS31603
DIN Grade1.4404

Chemical composition (wt%)

CSiMnPSCrNiMo
≤0.030≤1.00≤2.00≤0.045≤0.03016.00–18.5010.00–14.002.00–3.00

Mechanical properties

ItemMechanical Property
Tensile Strength Rm≥480 MPa
Yield Strength Rp0.2≥170 MPa
Elongation after Fracture A≥40%
Brinell Hardness≤187 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm – Ø300 mm
Diameter ToleranceStandard grade: h8, h9; High precision grade: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard Length3 meters for Ø40 mm and below; 6 meters for diameter above Ø40 mm (custom fixed lengths available)
End Face RequirementsFlat ends with chamfering and deburring

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot-rolled base material → Peeling and straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot-rolled base material → Peeling and straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote