Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

303Cu Stainless Steel Precision Ground Bar

Precision ground bar in 303Cu stainless steel.

AI-generated illustration of 303Cu Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Applications and Selection

Where a drawing specifies 303Cu, record that grade explicitly on the purchase request. The copper-bearing grade has a different material designation from standard 303, although the ground bars may look alike.

Identify the areas that must remain at the supplied diameter and the features to be cut on a lathe. Provide the bar length, diameter tolerance and material documentation requirement.

Specifications

Material identification

ItemTechnical Parameters
Material Grade303Cu
Chinese National Standard GradeY1Cr18Ni9Cu
UNS Grade–
DIN Grade–

Chemical composition (wt%)

CSiMnPSCrNiCu
≤0.15≤1.00≤3.00≤0.200.15~0.3517.00~19.008.00~10.001.50~3.50

Mechanical properties

ItemMechanical Properties
Tensile Strength Rm≥500 MPa
0.2% Proof Strength Rp0.2≥190 MPa
Elongation after Fracture A≥35%
Brinell Hardness≤187 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm – Ø300 mm
Diameter ToleranceStandard: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthØ40 mm and below: 3 meters; Over Ø40 mm: 6 meters available (custom fixed lengths supported)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot-rolled base material → Peeling & straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot-rolled base material → Peeling & straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote