Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Compare grade-specific selection questions in our 303, 304 and 316L precision ground bar guide.
Applications and Selection
303 is a free-machining stainless grade for projects that put emphasis on turning and drilling. The ground stock diameter is particularly relevant when an outside surface will be retained on the finished pin or fitting.
Identify the finished surfaces you intend to leave at stock size, the length needed per cut and the machining allowance on the remaining surfaces.
Specifications
Material identification
| Item | Technical Parameters |
|---|---|
| Material Grade | 303 |
| Chinese National Standard Grade | Y1Cr18Ni9 |
| UNS Grade | S30300 |
| DIN Grade | 1.4305 (X10CrNiS18-9) |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|
| ≤0.15 | ≤1.00 | ≤2.00 | ≤0.20 | 0.15–0.30 | 17.00–19.00 | 8.00–10.00 | ≤0.60 (Optional) |
Mechanical properties
| Item | Mechanical Properties |
|---|---|
| Tensile Strength Rm | ≥520 MPa |
| 0.2% Proof Strength Rp0.2 | ≥205 MPa |
| Elongation after Fracture A | ≥40% |
| Brinell Hardness | ≤187 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm–Ø300 mm |
| Diameter Tolerance | Standard grade: h8, h9; High precision grade: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | 3 meters for Ø40 mm and below; 6 meters for diameters above Ø40 mm (Custom lengths available) |
| End Face Requirements | Flat ends, chamfered and deburred |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot rolled base material → Peeling and straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot rolled base material → Peeling and straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
