Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

2507 Duplex Stainless Steel Precision Ground Bar

Precision ground bar in 2507 duplex stainless steel.

AI-generated illustration of 2507 Duplex Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Applications and Selection

2507 is a super duplex grade often considered where the design calls for a high level of corrosion resistance. Suitability still depends on the fluid, temperature and fabrication conditions.

Provide the complete material requirement, reporting needs and ground fit. Indicate which bar surfaces must remain at the as-supplied finish after machining.

Specifications

Material identification

ItemTechnical Parameter
Material Grade2507
Chinese National Standard Grade022Cr25Ni7Mo4N
UNS GradeS32750
DIN Grade1.4410

Chemical composition (wt%)

CSiMnPSCrNiMoN
≤0.030≤1.00≤1.20≤0.035≤0.02024.00–26.006.00–8.003.00–5.000.24–0.32

Mechanical properties

ItemMechanical Property
Tensile Strength Rm≥800 MPa
Yield Strength Rp0.2≥550 MPa
Elongation after Fracture A≥15%
Brinell Hardness≤310 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm – Ø300 mm
Diameter ToleranceConventional: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthØ40 mm and below: 3 meters; Above Ø40 mm: 6 meters available (custom fixed lengths supported)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot rolled base material → Peeling and straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot rolled base material → Peeling and straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote