Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Applications and Selection
2205 is a duplex stainless grade. For a corrosive application, pair the grade callout with the actual service medium instead of treating the numerical grade as a fit or finish specification.
Specify the required duplex grade designation, finished diameter, straightness and critical surface finish. Request traceability documentation if the component will be inspected to a material specification.
Specifications
Material identification
| Item | Technical Parameters |
|---|---|
| Material Grade | 2205 |
| Chinese National Standard Grade | 022Cr22Ni5Mo3N |
| UNS Grade | S32205/S31803 |
| DIN Grade | 1.4462 |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|
| ≤0.030 | ≤1.00 | ≤2.00 | ≤0.030 | ≤0.020 | 21.00–23.00 | 4.50–6.50 | 2.50–3.50 | 0.14–0.20 |
Mechanical properties
| Item | Mechanical Properties |
|---|---|
| Tensile Strength Rm | ≥620 MPa |
| 0.2% Proof Strength Rp0.2 | ≥450 MPa |
| Elongation after Fracture A | ≥25% |
| Brinell Hardness | ≤293 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm – Ø300 mm |
| Diameter Tolerance | Standard grade: h8, h9; High precision grade: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | 3 meters for Ø40 mm and below; 6 meters for diameters above Ø40 mm (custom fixed lengths available) |
| End Face Requirements | Flat ends, chamfered and deburred |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot-rolled base material → Peeling & straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot-rolled base material → Peeling & straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
