Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Applications and Selection
XM-19 is a nitrogen-strengthened austenitic stainless grade. Strength depends on the supplied condition, so identify that condition when the application has a defined mechanical requirement.
Include the diameter, finish, condition and heat or batch documentation required. Request confirmation of the material designation for interchange or repair projects.
Specifications
Material identification
| Item | Technical Parameters |
|---|---|
| Material Grade | XM-19 |
| UNS Grade | S20910 |
| Chinese National Standard Grade | 00Cr22Ni13Mo2N |
| DIN Grade | 1.3964 |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Mo | N | Nb | V |
|---|---|---|---|---|---|---|---|---|---|---|
| ≤0.06 | ≤1.00 | 4.00–6.00 | ≤0.045 | ≤0.030 | 20.50–23.50 | 11.50–13.50 | 1.50–3.00 | 0.20–0.40 | 0.10–0.30 | 0.10–0.30 |
Mechanical properties
| Item | Mechanical Properties |
|---|---|
| Tensile Strength Rm | ≥827 MPa (100ksi) |
| 0.2% Proof Strength Rp0.2 | ≥552 MPa (55ksi) |
| Elongation after Fracture A | ≥35% |
| Brinell Hardness | ≤293 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm–Ø300 mm |
| Diameter Tolerance | Standard: h8, h9; High Precision: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Ø40 mm and below: 3 meters; Above Ø40 mm: 6 meters available (custom fixed lengths supported) |
| End Face Requirements | Flat ends, chamfered and deburred |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
