Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

630 (17-4PH) Stainless Steel Precision Ground Bar

Precision ground bar in 630 (17-4PH) stainless steel.

AI-generated illustration of 630 (17-4PH) Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Applications and Selection

630, also designated 17-4PH, is a precipitation-hardening stainless steel. Different aging conditions change its mechanical properties, so a material specification should include the required condition where applicable.

State whether the diameter and straightness apply before or after final aging. Include the strength or hardness requirement and any finish zones on the drawing.

Specifications

Material identification

ItemTechnical Parameters
Material Grade17-4PH
Chinese National Standard Grade05Cr17Ni4Cu4Nb
UNS GradeS17400
DIN Grade1.4542

Chemical composition (wt%)

CSiMnPSCrNiCuNb
≤0.07≤1.00≤1.00≤0.040≤0.03015.00–17.503.00–5.003.00–5.000.15–0.45

Mechanical properties

ConditionTensile Strength ≥ MPaYield Strength ≥ MPaElongation ≥Hardness HRC
A (Solution Annealed)125511053%≤38
H9001310118010%40–45
H10251060100012%35–39
H1075100086513%33–37
H115093072516%28–32

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm–Ø300 mm
Diameter ToleranceStandard: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthØ40 mm and below: 3 meters; Over Ø40 mm: up to 6 meters (custom fixed lengths available)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot-rolled base material → Peeling & straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot-rolled base material → Peeling & straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote