Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Applications and Selection
430F is a free-machining ferritic grade for turned components. The F suffix matters when matching the material callout for a part, especially when sourcing replacement stock from visually similar bars.
List the intended cut length, target tolerance and downstream threading or boring operations. Include the desired material identification on the order.
Specifications
Material identification
| Item | Mechanical Properties |
|---|---|
| Material Grade | 430F |
| GB Standard Grade | Y10Cr17 |
| UNS Grade | S43020 |
| DIN Grade | 1.4104 |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr |
|---|---|---|---|---|---|
| ≤0.12 | ≤1.00 | ≤1.00 | ≤0.060 | ≥0.15 | 16.00–18.00 |
Mechanical properties
| Item | Required Index |
|---|---|
| Tensile Strength Rm | ≥450 MPa |
| 0.2% Proof Strength Rp0.2 | ≥205 MPa |
| Elongation after Fracture A | ≥22% |
| Brinell Hardness | ≤183 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm – Ø300 mm |
| Diameter Tolerance | Conventional: h8, h9; High Precision: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Ø40 mm and below: 3 meters; Above Ø40 mm: 6 meters available (custom fixed lengths supported) |
| End Face Requirements | Flat ends, chamfered and deburred |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
