Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

431 Stainless Steel Precision Ground Bar

Precision ground bar in 431 stainless steel.

AI-generated illustration of 431 Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Applications and Selection

431 is a hardenable stainless grade. When the bar is used in a loaded shaft, the drawing should identify both the required material condition and the size of the ground running or bearing surface.

Specify the ground diameter, straightness and the relevant mechanical property or hardness acceptance criteria. Indicate which values are needed on the inspection record.

Specifications

Material identification

ItemTechnical Parameter
Material Grade431
Chinese National Standard Grade17Cr16Ni2 (1Cr17Ni2)
UNS GradeS43100
DIN Grade1.4057

Chemical composition (wt%)

CSiMnPSCrNi
≤0.20≤1.00≤1.00≤0.040≤0.03015.00–17.001.50–2.50

Mechanical properties

ItemMechanical Property
Tensile Strength Rm≥860 MPa
0.2% Proof Strength Rp0.2≥655 MPa
Elongation after Fracture A≥15%
Brinell Hardness260–300 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm – Ø300 mm
Diameter ToleranceStandard: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthØ40 mm and below: 3 meters; Over Ø40 mm: 6 meters available (custom fixed lengths supported)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot-rolled base material → Peeling and straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot-rolled base material → Peeling and straightening → Centerless precision grinding → PolishingRa ≤0.2 µm
Process 4Hot-rolled base material → Quenching and tempering → Peeling and straightening → Centerless precision grinding → PolishingRa ≤0.2 µm
Process 5Hot-rolled base material → Peeling and straightening → Surface quenching → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote