Product Overview
Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.
Applications and Selection
316Ti is a titanium-stabilized grade. Where it is called out, provide the complete material designation and delivery condition so the quoted bar can be checked against the drawing.
Provide the length, finished diameter and tolerance band. Include the operating temperature range when it is relevant to the choice of material or fit.
Specifications
Material identification
| Item | Technical Parameters |
|---|---|
| Material Grade | 316Ti |
| Chinese National Standard Grade | 0Cr18Ni12Mo2Ti |
| UNS Grade | S31635 |
| DIN Grade | 1.4571 |
Chemical composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Mo | Ti |
|---|---|---|---|---|---|---|---|---|
| ≤0.08 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 16.00–18.50 | 10.00–14.00 | 2.00–3.00 | 5×C–0.70 |
Mechanical properties
| Item | Mechanical Properties |
|---|---|
| Tensile Strength Rm | ≥520 MPa |
| Yield Strength Rp0.2 | ≥205 MPa |
| Elongation after Fracture A | ≥40% |
| Brinell Hardness | ≤187 HB |
Dimensions and precision
| Item | Technical Requirements |
|---|---|
| Common Diameter Range | Ø3.0 mm – Ø300 mm |
| Diameter Tolerance | Conventional grades: h8, h9; High-precision grades: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | 3 meters for Ø40 mm and below; 6 meters for diameters above Ø40 mm (custom fixed lengths available) |
| End Face Requirements | Flat ends with chamfering and burr removal |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 2 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding | Ra 0.4–0.8 µm |
| Process 3 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing | Ra ≤0.2 µm |
