Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

303 Stainless Steel Precision Ground Bar

Precision ground bar in 303 stainless steel.

AI-generated illustration of 303 Stainless Steel Precision Ground Bar
AI-generated illustration

Product Overview

Specify finished diameter, fit, straightness and surface roughness for precision shaft and locating applications.

Compare grade-specific selection questions in our 303, 304 and 316L precision ground bar guide.

Applications and Selection

303 is a free-machining stainless grade for projects that put emphasis on turning and drilling. The ground stock diameter is particularly relevant when an outside surface will be retained on the finished pin or fitting.

Identify the finished surfaces you intend to leave at stock size, the length needed per cut and the machining allowance on the remaining surfaces.

Specifications

Material identification

ItemTechnical Parameters
Material Grade303
Chinese National Standard GradeY1Cr18Ni9
UNS GradeS30300
DIN Grade1.4305 (X10CrNiS18-9)

Chemical composition (wt%)

CSiMnPSCrNiMo
≤0.15≤1.00≤2.00≤0.200.15–0.3017.00–19.008.00–10.00≤0.60 (Optional)

Mechanical properties

ItemMechanical Properties
Tensile Strength Rm≥520 MPa
0.2% Proof Strength Rp0.2≥205 MPa
Elongation after Fracture A≥40%
Brinell Hardness≤187 HB

Dimensions and precision

ItemTechnical Requirements
Common Diameter RangeØ3.0 mm–Ø300 mm
Diameter ToleranceStandard grade: h8, h9; High precision grade: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard Length3 meters for Ø40 mm and below; 6 meters for diameters above Ø40 mm (Custom lengths available)
End Face RequirementsFlat ends, chamfered and deburred

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot rolled base material → Precision drawing → Centerless precision grindingRa 0.4–0.8 µm
Process 2Hot rolled base material → Peeling and straightening → Centerless precision grindingRa 0.4–0.8 µm
Process 3Hot rolled base material → Peeling and straightening → Centerless precision grinding → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote