Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

Aluminum Alloy Pneumatic Cylinder Tube

Aluminum alloy tube for pneumatic cylinder assemblies.

AI-generated illustration of Aluminum Alloy Pneumatic Cylinder Tube
AI-generated illustration

Product Overview

Confirm bore size, tolerance, anodic coating and section against the design.

Applications and Selection

The tube section must fit the end caps and any external mounting or sensor features. The bore is a separate fit that needs to match the piston seal and its intended travel.

Send a section drawing along with the alloy, bore tolerance and coating callout. Identify the inner and outer finish requirements independently if they differ.

Specifications

Tube finish and dimensional requirements

Technical Parameter Of Aluminum Alloy Cylinder Tube
Material6063-T5,6005-T5,6061-T5
Inner diameterØ16-320 mm
Inner diameter toleranceH9~H11
Straightness tolerance≤1 mm/1000 mm
Surface RoughnessRa<0.6
Thickness of internal and external film≥15um
Hardness of surface oxide film≥400HV

Bore tolerance by nominal diameter

DiameterTolerance
H9H10H11
160+0.0430+0.070+0.110
20+0.052+0.084+0.130
25+0.052+0.084+0.130
32+0.062+0.100+0.160
40+0.062+0.100+0.160
50+0.062+0.100+0.160
63+0.074+0.120+0.190
70+0.074+0.120+0.190
80+0.074+0.120+0.190
100+0.087+0.140+0.220
125+0.100+0.160+0.250
160+0.100+0.160+0.250
200+0.115+0.185+0.290
250+0.115+0.185+0.290
320+0.140+0.230+0.360

Alloy composition (wt%)

GradeSiFeCuMnMgCrNiZnTiOthersA1
60630.20~0.60.350.10.10.45~0.90.1–0.10.10.050.15Rest
60610.40~0.80.70.15~0.400.150.8~1.20.04~0.35–0.250.150.050.15Rest
60050.6~0.90.350.10.10.40~0.60.1–0.10.10.050.15Rest

Mechanical properties by alloy and condition

GradeConditionWall Thickness/ mmResults of Tensile Test at Room TemperatureHBW
Tensile Strength Rm/ MPaProof strength non-proportional extension Rp0.2/ MPaElongation after fracture a,b/%
AA50 mm
No less than
6063T5≤3.00175130–665
>3.00~25.001601107565
T6≤10.00215170–775
>10~251951608680
6061T5≤16.0024020597–
T6≤5.00260240–795
>5.00~25.0026024010895
6005T5≤6.30250200–7–
>6.30~25.0025020087–
T6Solid Profile≤5.00270225–690
>5.00~10.00260215–685
>10.00~25.002502008685
Hollow Profiles≤5.00255215–685
>5.00~15.002502008685

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote