Product Overview
Select coating thickness, finished outside diameter and tolerances to match the application drawing.
Applications and Selection
A plated 420 shaft may have separate requirements for base-steel heat treatment and the hard chrome layer. A single surface hardness value does not describe both.
Call out the base condition and any post-coating size requirement. Mark the sliding surface and the location of threads, reliefs and uncoated end features.
Specifications
Finish and dimensional requirements
| Item | Technical Parameters |
|---|---|
| Base Material Grade | 420 |
| National Standard Grade | 20Cr13 |
| Surface Treatment | Chrome Plated |
| Hard chrome thickness | Diameter ≤Ø20: 15 µm; Diameter>Ø20: 20 µm, thickness can be customized as required |
| Surface Hardness after Chrome Plated | HV800–1100 |
| Common Diameter Range | Ø3.0 mm–Ø300 mm |
| Diameter Tolerance | Conventional: h8, h9; High Precision: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Fixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for sizes above Ø40 mm; customized fixed lengths available for large specifications |
| End Face Requirements | Flat ends with chamfering and burr removal |
Base material composition (wt%)
| C | Si | Mn | P | S | Cr |
|---|---|---|---|---|---|
| 0.16–0.25 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 12.00–14.00 |
Base material mechanical properties
| Item | Mechanical Properties |
|---|---|
| Tensile Strength Rm | ≥735 MPa |
| 0.2% Proof Strength Rp0.2 | ≥540 MPa |
| Elongation after Fracture A | ≥12% |
| Base Material Hardness | 217–241 HB |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision drawing → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
| Process 2 | Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
| Process 3 | Forged round bar → Turning finishing → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
