Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

316L Chrome-Plated Stainless Steel Shaft

Hard chrome finish over a 316L stainless steel base.

AI-generated illustration of 316L Chrome-Plated Stainless Steel Shaft
AI-generated illustration

Product Overview

Select coating thickness, finished outside diameter and tolerances to match the application drawing.

Applications and Selection

This configuration pairs a 316L substrate with a hard chrome working surface. A machining drawing should make clear where bare stainless steel may be exposed, such as at ends or holes.

Specify the finished diameter after coating, minimum coverage of the seal track and masked areas. Include the service medium when corrosion compatibility is part of the selection.

Specifications

Finish and dimensional requirements

ItemMechanical Properties
Substrate Grade316L
National Standard Grade022Cr17Ni12Mo2
Surface TreatmentChrome Plated
Hard chrome thicknessDiameter ≤Ø20: 15 µm; Diameter >Ø20: 20 µm, thickness customizable as required
Surface Hardness after Chrome PlatedHV800–1100
Common Diameter RangeØ3.0 mm–Ø300 mm
Diameter ToleranceConventional: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthFixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for above Ø40 mm, customized fixed lengths available for large specifications
End Face RequirementsFlat end, chamfered and deburred

Base material composition (wt%)

CSiMnPSCrNiMo
≤0.03≤1.00≤2.00≤0.045≤0.03016.00–18.5010.00–14.002.00–3.00

Base material mechanical properties

ItemIndex Requirements
Tensile Strength Rm≥485 MPa
Yield Strength Rp0.2≥175 MPa
Elongation after Fracture A≥40%
Substrate Hardness≤187 HB

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled substrate → Precision drawing → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm
Process 2Hot-rolled substrate → Peeling and straightening → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm
Process 3Forged round bar → Turning finishing → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote