Product Overview
Select coating thickness, finished outside diameter and tolerances to match the application drawing.
Applications and Selection
This shaft combines a precipitation-hardening stainless substrate with a chrome finish. The aging condition determines the substrate requirement and should be specified even when the buyer is mainly replacing a worn surface.
Send the required aging condition, post-plating diameter and coating limits. Identify any final polishing, inspection records or uncoated end features required.
Specifications
Finish and dimensional requirements
| Item | Technical Parameters |
|---|---|
| Base Material Grade | 17-4PH Precipitation Hardening Stainless Steel |
| Chinese National Standard Grade | 05Cr17Ni4Cu4Nb |
| UNS Grade | S17400 |
| DIN Grade | 1.4542 |
| Surface Treatment | Chrome Plated |
| Hard chrome thickness | Diameter ≤Ø20: 15 µm; Diameter>Ø20: 20 µm, thickness customizable as required |
| Surface Hardness of Chrome Plated Layer | HV800–1100 |
| Common Diameter Range | Ø3.0 mm–Ø300 mm |
| Diameter Tolerance | Standard grade: h8, h9; High precision grade: h7, f7, g6, h6 |
| Roundness | ≤1/2 of diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Fixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for sizes above Ø40 mm, custom fixed lengths available for large specifications |
| End Face Requirements | Flat ends with chamfering and deburring |
Base material composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Cu | Nb |
|---|---|---|---|---|---|---|---|---|
| ≤0.07 | ≤1.00 | ≤1.00 | ≤0.040 | ≤0.030 | 15.00–17.50 | 3.00–5.00 | 3.00–5.00 | 0.15–0.45 |
Base material mechanical properties
| Condition | Tensile Strength ≥ MPa | Yield Strength ≥ MPa | Elongation ≥ | Hardness HRC |
|---|---|---|---|---|
| A (Solution Annealed) | 1255 | 1105 | 3% | ≤38 |
| H900 | 1310 | 1180 | 10% | 40–45 |
| H1025 | 1060 | 1000 | 12% | 35–39 |
| H1075 | 1000 | 865 | 13% | 33–37 |
| H1150 | 930 | 725 | 16% | 28–32 |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled base material → Precision Drawing → Centerless Precision Grinding → Polishing → Chrome Plated → Secondary Polishing | Ra ≤0.2 µm |
| Process 2 | Hot-rolled base material → Peeling & Straightening → Centerless Precision Grinding → Polishing → Chrome Plated → Secondary Polishing | Ra ≤0.2 µm |
| Process 3 | Forged Round Bar → Turning Finishing → Centerless Precision Grinding → Polishing → Chrome Plated → Secondary Polishing | Ra ≤0.2 µm |
