Product Overview
Confirm the lead, pitch, starts, handedness, mating nut and end machining.
Check thread pitch, lead, starts and mating requirements with our trapezoidal lead screw and nut selection guide.
Applications and Selection
Pitch is the spacing between adjacent threads. Lead is the nut travel per screw revolution. On a multi-start screw those numbers differ, so both are useful when replacing a screw without changing the travel ratio.
Specify the thread designation, starts, handedness, required travel and end machining. Confirm the nut and support arrangement, including backlash requirements if positioning accuracy is important.
Specifications
Trapezoidal screw sizes
| Designation | Pitch | Starts | Nominal diameter | Lead angle |
|---|---|---|---|---|
| Tr10×2 | 2 | 1 | 10 | 4.05° |
| Tr10×4-P2 | 2 | 2 | 10 | 8.05° |
| Tr10×8-P2 | 2 | 4 | 10 | 15.80° |
| Tr12×3 | 3 | 1 | 12 | 5.20° |
| Tr12×6-P3 | 3 | 2 | 12 | 10.31° |
| Tr12×12-P3 | 3 | 4 | 12 | 19.99° |
| Tr14×3 | 3 | 1 | 14 | 4.37° |
| Tr14×6-P3 | 3 | 2 | 14 | 8.69° |
| Tr14×12-P3 | 3 | 4 | 14 | 16.99° |
| Tr16×4 | 4 | 1 | 16 | 5.20° |
| Tr16×8-P4 | 4 | 2 | 16 | 10.31° |
| Tr16×16-P4 | 4 | 4 | 16 | 19.99° |
| Tr18×4 | 4 | 1 | 18 | 4.55° |
| Tr18×8-P4 | 4 | 2 | 18 | 9.04° |
| Tr18×16-P4 | 4 | 4 | 18 | 17.66° |
| Tr20×4 | 4 | 1 | 20 | 4.05° |
| Tr20×8-P4 | 4 | 2 | 20 | 8.05° |
| Tr20×16-P4 | 4 | 4 | 20 | 15.80° |
| Tr24×5 | 5 | 1 | 24 | 4.23° |
| Tr24×10-P5 | 5 | 2 | 24 | 8.42° |
| Tr24×20-P5 | 5 | 4 | 24 | 16.49° |
| Tr28×5 | 5 | 1 | 28 | 3.57° |
| Tr28×10-P5 | 5 | 2 | 28 | 7.12° |
| Tr28×20-P5 | 5 | 4 | 28 | 14.02° |
| Tr32×6 | 6 | 1 | 32 | 3.77° |
| Tr32×12-P6 | 6 | 2 | 32 | 7.50° |
| Tr32×24-P6 | 6 | 4 | 32 | 14.76° |
| Tr36×6 | 6 | 1 | 36 | 3.31° |
| Tr36×12-P6 | 6 | 2 | 36 | 6.60° |
| Tr36×24-P6 | 6 | 4 | 36 | 13.03° |
| Tr40×7 | 7 | 1 | 40 | 3.49° |
| Tr40×14-P7 | 7 | 2 | 40 | 6.96° |
| Tr40×28-P7 | 7 | 4 | 40 | 13.72° |
