Product Overview
An outer chrome finish can be specified. Select the tube dimensions and confirm coating and tolerance requirements on the drawing.
Applications and Selection
Precision-rolled tube is selected by both its bore and outside diameter. Decide which diameter controls the fit, and include any wall thickness or concentricity requirement that matters after final machining.
If an outer chrome coating is needed, state whether the outside diameter tolerance applies before or after plating. Include cut length and the required bore condition.
Specifications
Tube dimensions and tolerances
| Material | ID ( mm) | OD ( mm) | Wall Thickness ( mm) | Weight (Kg) | Standard Length ( mm) | OD Tolerance | ID Surface Roughness | Before Chrome Plated OD Surface Roughness |
|---|---|---|---|---|---|---|---|---|
| 304/316L | 13 | 18 | 2.5 | 1.00 | 2000 | ISO f7, f8, On Request | R a ≤ 0.4 | Ra ≤ 0.4 |
| 16 | 20 | 2 | 0.93 | 3000 | ||||
| 20 | 25 | 2.5 | 1.50 | 3000 | ||||
| 25 | 30 | 2.5 | 1.80 | 3450 | ||||
| 30 | 40 | 5 | 2.80 | 3000 | ||||
| 32 | 38 | 3 | 2.70 | 3000 | ||||
| 35 | 45 | 5 | 3.70 | 3000 | ||||
| 40 | 50 | 5 | 5.80 | 3000 | ||||
| 45 | 55 | 5 | 6.80 | 3000 | ||||
| 50 | 60 | 5 | 7.10 | 3000 | ||||
| 55 | 70 | 7.5 | 12.10 | 3000 | ||||
| 90 | 120 | 15 | 40.60 | 3000 | ||||
| Note: Surface of Stainless Steel tube can be Chrome Plated, Usually the Chrome Plated layer thickness is 15 µm, In addition, Chrome Layer Thickness can be selected by Customers. After the chrome plated, the surface roughness is Ra ≤ 0.2 | ||||||||
