Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

2205 Chrome-Plated Stainless Steel Shaft

Hard chrome finish over a 2205 stainless steel base.

AI-generated illustration of 2205 Chrome-Plated Stainless Steel Shaft
AI-generated illustration

Product Overview

Select coating thickness, finished outside diameter and tolerances to match the application drawing.

Applications and Selection

2205 duplex stainless is the shaft substrate. Where the design relies on hard chrome in a sliding region, verify the coating requirement for that region and the conditions where bare substrate remains exposed.

Provide the service fluid, finished fit and coating boundaries. If the design needs evidence of material grade or coating inspection, call that out with the drawing.

Specifications

Finish and dimensional requirements

ItemTechnical Parameters
Base Material Grade2205 Duplex Stainless Steel
GB Standard Grade022Cr22Ni5Mo3N
UNS GradeS32205
DIN Grade1.4462
Surface TreatmentChrome Plated
Hard chrome thicknessDiameter ≤Ø20: 15 µm; Diameter>Ø20: 20 µm, customizable thickness as required
Surface Hardness after Chrome PlatedHV800–1100
Common Diameter RangeØ3.0 mm–Ø300 mm
Diameter ToleranceConventional grades: h8, h9; High-precision grades: h7, f7, g6, h6
Roundness≤1/2 of diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthFixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for diameters above Ø40 mm, customized fixed lengths available for large specifications
End Face RequirementsFlat ends with chamfering and burr removal

Base material composition (wt%)

CSiMnPSCrNiMoN
≤0.030≤1.00≤2.00≤0.030≤0.02021.00–23.004.50–6.502.50–3.500.14–0.20

Base material mechanical properties

ItemMechanical Properties
Tensile Strength Rm≥620 MPa
0.2% Proof Strength Rp0.2≥450 MPa
Elongation after Fracture A≥25%
Base Material Hardness≤293 HB

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grinding → Polishing → Chrome Plated → Secondary polishingRa ≤0.2 µm
Process 2Hot-rolled base material → Peeling & straightening → Centerless precision grinding → Polishing → Chrome Plated → Secondary polishingRa ≤0.2 µm
Process 3Forged round bar → Turning finishing → Centerless precision grinding → Polishing → Chrome Plated → Secondary polishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote