Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

431 Chrome-Plated Stainless Steel Shaft

Hard chrome finish over a 431 stainless steel base.

AI-generated illustration of 431 Chrome-Plated Stainless Steel Shaft
AI-generated illustration

Product Overview

Select coating thickness, finished outside diameter and tolerances to match the application drawing.

Applications and Selection

For a loaded shaft, confirm the 431 substrate condition independently of the working chrome surface. The product tables list different quenched and tempered conditions, so match the one called out on the drawing.

Identify the relevant strength condition, chrome thickness and the datum for straightness or runout. Provide the working section length and end connection details.

Specifications

Finish and dimensional requirements

ItemTechnical Parameters
Base Material Grade431
Chinese National Standard Grade17Cr16Ni2 (1Cr17Ni2)
UNS GradeS43100
DIN Grade1.4057
Surface TreatmentChrome Plated
Hard chrome thicknessDiameter ≤Ø20: 15 µm; Diameter>Ø20: 20 µm, thickness customizable on demand
Surface Hardness after Chrome PlatedHV800–1100
Common Diameter RangeØ3.0 mm–Ø300 mm
Diameter ToleranceStandard: h8, h9; High Precision: h7, f7, g6, h6
Roundness≤1/2 diameter tolerance
Straightness≤0.10 mm/1000 mm
Standard LengthFixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for diameters above Ø40 mm, customized fixed lengths available for large specifications
End Face RequirementsFlat ends, chamfered and deburred

Base material composition (wt%)

CSiMnPSCrNi
≤0.20≤1.00≤1.00≤0.040≤0.03015.00–17.001.50–2.50

Base material mechanical properties

ItemMechanical Properties
Tensile Strength Rm≥860 MPa
Yield Strength Rp0.2≥655 MPa
Elongation after Fracture A≥15%
Base Material Hardness260–300 HB

Quenched and tempered mechanical properties

Quenching and TemperingQT800QT900
Tensile Strength Rm ( MPa)800–950900–1050
Yield Strength Rp0.2 ( MPa)≥600≥700
Elongation after Fracture A5 (%)≥13≥12
Room-temperature Impact Energy KV₂ (J)≥25≥20
Brinell Hardness HB240–290270–320
Rockwell Hardness HRC23–3027–35

Processing and surface finish

Process TypeComplete Process FlowSurface Roughness
Process 1Hot-rolled base material → Precision drawing → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm
Process 2Hot-rolled base material → Peeling and straightening → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm
Process 3Forged round bar → Turning finishing → Centerless precision grinding → Polishing → Chrome Plated → PolishingRa ≤0.2 µm

Send your requirements

Include the product size, drawing or part number, and quantity.

Request a Quote