Product Overview
Select coating thickness, finished outside diameter and tolerances to match the application drawing.
Applications and Selection
This configuration pairs a 316L substrate with a hard chrome working surface. A machining drawing should make clear where bare stainless steel may be exposed, such as at ends or holes.
Specify the finished diameter after coating, minimum coverage of the seal track and masked areas. Include the service medium when corrosion compatibility is part of the selection.
Specifications
Finish and dimensional requirements
| Item | Mechanical Properties |
|---|---|
| Substrate Grade | 316L |
| National Standard Grade | 022Cr17Ni12Mo2 |
| Surface Treatment | Chrome Plated |
| Hard chrome thickness | Diameter ≤Ø20: 15 µm; Diameter >Ø20: 20 µm, thickness customizable as required |
| Surface Hardness after Chrome Plated | HV800–1100 |
| Common Diameter Range | Ø3.0 mm–Ø300 mm |
| Diameter Tolerance | Conventional: h8, h9; High Precision: h7, f7, g6, h6 |
| Roundness | ≤1/2 diameter tolerance |
| Straightness | ≤0.10 mm/1000 mm |
| Standard Length | Fixed length of 3 meters for Ø40 mm and below; fixed length of 6 meters for above Ø40 mm, customized fixed lengths available for large specifications |
| End Face Requirements | Flat end, chamfered and deburred |
Base material composition (wt%)
| C | Si | Mn | P | S | Cr | Ni | Mo |
|---|---|---|---|---|---|---|---|
| ≤0.03 | ≤1.00 | ≤2.00 | ≤0.045 | ≤0.030 | 16.00–18.50 | 10.00–14.00 | 2.00–3.00 |
Base material mechanical properties
| Item | Index Requirements |
|---|---|
| Tensile Strength Rm | ≥485 MPa |
| Yield Strength Rp0.2 | ≥175 MPa |
| Elongation after Fracture A | ≥40% |
| Substrate Hardness | ≤187 HB |
Processing and surface finish
| Process Type | Complete Process Flow | Surface Roughness |
|---|---|---|
| Process 1 | Hot-rolled substrate → Precision drawing → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
| Process 2 | Hot-rolled substrate → Peeling and straightening → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
| Process 3 | Forged round bar → Turning finishing → Centerless precision grinding → Polishing → Chrome Plated → Polishing | Ra ≤0.2 µm |
