Product Overview
Choose the grade and finish to suit the rod, seal and operating environment.
Applications and Selection
Select the stainless grade and surface condition together. A grade that meets a corrosion requirement still needs a finished diameter and surface texture compatible with the seal or guide bushing.
State the exposure medium and cleaning regime, along with grade, rod diameter and end connections. If hard chrome is required, specify the coating limits and any areas that must remain uncoated.
Specifications
Austenitic grade composition (wt%)
| Grade | C≤ | Si≤ | Mn≤ | P≤ | S | Cr | Ni | Mo | Cu | N | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 303 | 0.15 | 1 | 2 | 0.2 | ≥0.15 | 17.0–19.0 | 8.0–10.0 | ≤0.60 | — | — | — |
| 303Cu | 0.15 | 1 | 3 | 0.2 | ≥0.15 | 17.0–19.0 | 8.0–10.0 | ≤0.60 | 1.5–3.5 | — | — |
| 304 | 0.08 | 1 | 2 | 0.045 | 0.03 | 18.0–20.0 | 8.0–10.5 | — | — | — | — |
| 316L | 0.03 | 1 | 2 | 0.045 | 0.03 | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | — | — | — |
| 316Ti | 0.08 | 1 | 2 | 0.045 | 0.03 | 16.0–18.0 | 10.0–14.0 | 2.0–3.0 | — | — | ≥5×C |
Martensitic and ferritic grade composition (wt%)
| Grade | C | Si≤ | Mn≤ | P≤ | S≤ | Cr | Ni | Mo | Others |
|---|---|---|---|---|---|---|---|---|---|
| 420 | 0.16–0.25 | 1 | 1 | 0.04 | 0.03 | 12.0–14.0 | ≤0.75 | ≤0.50 | — |
| 30Cr13 | 0.26–0.35 | 1 | 1 | 0.04 | 0.03 | 12.0–14.0 | ≤0.60 | — | — |
| 431 | 0.12–0.20 | 1 | 1 | 0.04 | 0.03 | 15.0–17.0 | 1.25–2.50 | ≤0.50 | — |
| 440C | 0.95–1.20 | 1 | 1 | 0.04 | 0.03 | 16.0–18.0 | ≤0.75 | ≤0.75 | — |
| 430F | 0.12 | 1 | 1.25 | 0.06 | ≥0.15 | 16.0–18.0 | — | ≤0.60 | — |
Duplex grade composition (wt%)
| Grade | C≤ | Si≤ | Mn≤ | P≤ | S≤ | Cr | Ni | Mo | N |
|---|---|---|---|---|---|---|---|---|---|
| 2205 | 0.03 | 1 | 2 | 0.035 | 0.02 | 21.0–23.0 | 4.5–6.5 | 2.5–3.5 | 0.14–0.20 |
| 2507 | 0.03 | 0.8 | 1.2 | 0.035 | 0.02 | 24.0–26.0 | 6.0–8.0 | 3.0–5.0 | 0.24–0.32 |
Other stainless grade composition (wt%)
| Grade | C≤ | Si≤ | Mn | P≤ | S≤ | Cr | Ni | Mo | Cu | N | Nb | V |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 17-4PH | 0.07 | 1 | 1 | 0.04 | 0.03 | 15.0–17.5 | 3.0–5.0 | — | 3.0–5.0 | — | 0.15–0.45 | — |
| XM-19 | 0.06 | 0.75 | 4.0–6.0 | 0.04 | 0.03 | 20.5–23.5 | 11.5–13.5 | 1.5–3.0 | — | 0.20–0.40 | 0.10–0.30 | 0.10–0.30 |
