Wuxi, Jiangsu, China yangxin0916@sina.com +86 510 8369 0197 EN 中文

Trapezoidal Lead Screw Pitch, Lead and Starts: A Buyer’s Guide

30° Trapezoidal Lead Screw Nut
Trapezoidal lead screw nut example. The correct mating thread must be confirmed from its drawing.

Two trapezoidal lead screws can have similar diameters and thread spacing yet move a nut by different distances per revolution. When ordering a screw or replacement nut, record pitch, lead, number of starts and thread direction explicitly.

Pitch and lead describe different measurements

Pitch is the axial spacing between corresponding points on adjacent threads. Lead is the axial travel during one complete revolution. For a single-start screw they are equal. For a multi-start screw, lead equals pitch multiplied by the number of starts.

Illustrative screw Pitch Starts Lead
Single start 4 mm 1 4 mm/revolution
Two start 4 mm 2 8 mm/revolution

These are calculation examples, not specifications for a listed product. At 100 revolutions per minute, an 8 mm lead gives a theoretical travel speed of 800 mm per minute. Actual motion accuracy also depends on the assembly and control system.

Why a photograph or outside diameter is not enough

A nut has to match the screw’s thread form and dimensions. Similar appearance does not confirm compatibility. Request the full thread designation, applicable standard, tolerance information, direction and starts. If a worn sample is the only reference, provide measurements and clear photographs, but treat identification as provisional until the mating requirements are confirmed.

Newneng lists both a trapezoidal lead screw and a 30° trapezoidal lead screw nut. Confirm the actual pairing on the order rather than assuming every catalog nut fits every screw.

Include the rest of the assembly in the enquiry

  • Threaded length, overall length and available travel
  • End journals, shoulders, bearing seats and connection threads
  • Nut material, mounting form and available mounting space
  • Required axial play or backlash acceptance method
  • Load direction, travel speed, operating orientation and lubrication arrangement
  • Whether the order is a matched screw-and-nut assembly or a replacement component

Does a larger lead automatically mean a better screw?

It changes the relationship between rotation and travel. The application still needs a review of load, support arrangement, speed and positioning requirements. Do not infer self-locking or load-holding capability from a thread description alone. If a vertical axis requires holding when power is removed, identify that requirement separately for the equipment designer.

A quick check before sending the RFQ

Write the intended travel per revolution alongside the thread designation. This gives the buyer and supplier a second way to detect a pitch/lead misunderstanding before a part is made or selected.

Send your screw and nut drawings to Newneng with the required travel per revolution, quantity and mating requirements for a quotation review.

Project enquiries

Working from a drawing?

Send the critical dimensions, finish and quantity. We’ll help you check the right product family.

Request a Quote